Development trend of the hottest pharmaceutical pa

2022-09-28
  • Detail

Development trend of pharmaceutical packaging ink

after years of development, the production process of composite film has been relatively perfect. Therefore, there will be no major changes in the near future. Since the existing production process of composite membrane is more or less accompanied by the production of waste, it is necessary to make some changes in the production process to meet the needs of environmental protection. (1) In the process of plastic gravure printing, benzene free ink is used to replace the current ink based on benzene solvent. At present, although many domestic manufacturers have introduced benzene free ink, its performance has not fully met the needs of plastic printing, and its price is expensive. The unit price is 2 ~ 4 times that of ordinary ink, which is not conducive to reducing the printing cost. Therefore, benzene free ink will replace ordinary ink. Enterprises should install waste gas treatment devices to reduce the emission of organic substances (especially Benzene Series) in the printing process. (2) In the dry compounding process, the solvent used is ethyl acetate. Although the emission of ethyl acetate gas is not clearly specified in the integrated emission standard of air pollutants (g), the gas is harmful to human respiratory tract, so it should be used as little as possible. 4. The basic safety issues of fatigue testing machine in the use process have been developed. Alcohol soluble adhesives that can replace polyurethane adhesives with good development momentum with ethyl acetate as solvent. The adhesive uses alcohol as solvent, without mass production pollution, and the cost is not high, so it will be widely used

raw materials and material structure

the materials required for the production of composite films mainly include polypropylene, polyethylene, polyester, polyester aluminum plating, aluminum foil, etc., which will remain the main raw materials for the production of composite films in the future. It will still be widely used for a long time. Because the composite films and bags composed of these raw materials are disposable consumer goods, which can rarely be recycled, people try to replace them with degradable plastic films with the same performance. It is worth noting that as people pay more and more attention to environmental protection, paper is increasingly used in the production of composite films. The composite film of paper/flow layer/aluminum foil/flow layer/pe structure will become more and more popular

in a word, there will be no revolutionary changes in the process and raw material utilization of composite membrane production in the coming years. For production enterprises, while paying full attention to environmental protection issues, they should strive to improve their own quality, improve product quality and grade, and improve their own management level To meet the increasingly international market competition

this article comes from web version 7. Experimental speed: tetxing speed: 0.001~500mm/min. The right belongs to the original author, which is only for everyone to share and learn. If the author believes that infringement is involved, please contact us, and we will delete it immediately after verification

Copyright © 2011 JIN SHI